Hi-Ratio Cable Breakout Boots, Three Entry Table of Dimensions, inch (mm): Body ID PART NUMBER (See Note*) Exp. (A), Min T14-50FR T3-100FR T150-400FR 1.50 (38) 1.70 (43) 3.20 (81) Note*: Material: Leg ID Rec'd. (B), Max 0.50 (13) 0.36 (9) 1.40 (36) Exp. (C), Min 0.65 (16) 0.82 (21) 1.40 (36) Length Recovered Min (E), Body (F), Leg Rec'd. (D), Max 0.16 (4) 0.12 (3) 0.50 (13) 1.8 (46) 2.3 (58) 3.5 (89) 2.2 (56) 2.2 (56) 1.6 (41) Rec'd. Wall Thickness Ref (W) 0.09 (2.3) 0.12 (3.0) 0.12 (3.0) Add "NA" to the end of Part Number if no adhesive is required -152, heat shrinkable, crosslinked flexible polyolefin per Mil-I-81765/1A Type II Factory applied sealant: Factory applied hot melt adhesive is standard. Wire and Harnessing Products Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Title: Hi-Ratio Cable Breakout Boot, Three Entry Specification Control Drawing Size A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. METRIC DIMENSIONS ARE SHOWN IN BRACKETS Drawn By: Cage Code Document No. 06090 TXXX-XXXFR-High-Ratio Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. Org. Date: Original file: A. Ng 03/12/03 N/A If this document is printed it becomes uncontrolled. Check for the latest revision. Rev.: Rev. Date: A March 12, 2003 File : r030125.doc Scale: None Sheet: 1 of 1